|
|
|
|
|
|
|
|
|
Work desks feature soft-radiused edges for a more user-friendly product. Work surfaces are 1-1/16" thick high pressure plastic laminate with radiused corners, edged with radiused T-moulding. Facing and backing materials are of equal balance; the core material is 42 to 45 lb. per square foot density, grade R. CAN3-0188-1M78. Work surfaces are tested to Sec. 5.1.6. adhesive of C**/CGSB-44.227.96 per ASTM C-297 and approved. As well, they comply to ASTM 4060 regarding wearability and colour stability.
All metal components are finished in a high-quality, lead-free, alkyd baked enamel complying to testing of paint finishes in section 5.2.2 and 5.2.4 of CAN/CGSB 44.227 colour stability, CGSB-1-GP-71 scratch resistance, and ASTM-D3363 hardness H.
Legs are 18-gauge double-wall sheet metal with radiused front construction, and a 14-gauge steel u-channel insert at the base, with welded nut insert for adjustable glides. Knockout 1 3/8" x 2" rubber wire grommets at the top back of both legs allow wires to connect from desk to desk.
Back panels are of 18-gauge single-wall formed furniture grade metal, and are connected to the underside of the top and the leg frames to prevent warpage. Wire access holes are located near the top on both sides of the back panel. A wire management trough can also be connected to the inside or outside top.
© 2008 Dansanna International