|
|
|
|
|
|
|
|
|
[ Click here for model specifications ]
G-Series work desks feature soft-radiused edges for a more user-friendly product. Work surfaces are 1-1/16" thick high pressure plastic laminate with radiused corners, edged with radiused T-moulding. Facing and backing materials are of equal balance; the core material is 42 to 45 lb. per square foot density, grade R. CAN3-0188-1M78. Work surfaces are tested to Sec. 5.1.6. adhesive of C**/CGSB-44.227.96 per ASTM C-297 and approved. As well, they comply to ASTM 4060 regarding wearability and colour stability.
All tops, up to 36" wide, have one centre wire management grommet; 42" wide tops and over have wire grommets at each end of the desk top. Tops incorporate steel inserts for leg attachment.
Leg frames are 16-gauge 1" x 1" steel rectangular tubing with a 20 ga. insert between the two uprights. At the top of the insert there is an opening to permit wire access between adjoining tables. The top attachment channel is of 14-gauge steel and incorporates machine screw pass holes for leg attachment. The frames are MIG welded, and nylon-faced steel adjustable glides are fitted. Cut-back leg assemblies are fitted when and where desk top corners are cut. This feature improves user movement when utilizing more than one work surface.
Back panels are of 18-gauge formed furniture grade metal, and are connected to the underside of the top and the leg frames to improve stability. Panels are double-flanged along the bottom edge for added strength and as a safety feature.
© 2008 Dansanna International