Home | About Dansanna | Contact Us | How to Order | Terms and Conditions | Interior Design


Rampart Office Paneling Systems - Radius Plus - Specifications

Order It Now

For immediate response to questions, please email us or call TOLL FREE: 1-888-633-4234

The Radius System offers many different types of panels to meet specific needs. All panels are capable of being joined together to form continuous walls or enclosures. Panels are capable of being connected in pairs,threes or fours, all having a common intersection point. Panels of different heights are capable of boing joined together in various configurations. Concealed panel connectors provide not only a rigid connection between panels but also a light and sound barrier the full length of the panel.

Individual panels have a steel interior frame, fabricated from roll-formed steel sections securely welded at the corners. A minimum of two steel tubes run vertically the full height of the panel. The bottom tube has threaded inserts to permit attachment of adjustable levellers, feet or stand-off supports. All panels have two levellers to provide a minimum vertical adjustment of 3". The panel thickness is nominally 2 3/4" (7 cm) thick and the width and height is in accordance with the listed standard sizes. Special heights may be considered upon request.

The interior of the panel consists of a hardboard septum which is securely fixed into position by means of metal clips screwed to the steel frame. Layers of fiberglass are placed to each side of the hardboard septum to form an internal construction which provides the following acoustical properties. NOISE REDUCTION CO-EFFICIENT (N.R.C.)-0.85 SOUND TRANSMISSION CLASS (S.T.C.)-22

Each side of the panel is covered with fabric. The fabric is applied in an upholstery manner providing a tight, true design, free from lumps, wrinkles or sagging. Fabrics are available in three standard grades of fabric; Group 1, 2 and Group 3. Customers Own Material(C.O.M.) may be used when samples are approved. Group 1 prices apply to C.O.M. material.

Panel end trims form a part of the panel construction and are extruded aluminum powder painted. The end trim design incorporates circular slots for concealed connecting strips that attach panels together over the length of the panel. The top and bottom of the panel end trim is also designed to accept a zinc, diecast I-CONNECTOR that securely holds panels together and prevents panel twist at the connection. The end trim is designed to accept components in two different ways.

1) A continuous interior slot that permits the attachment of components in a simple and positive manner. Height adjustment of components is infinite over the entire length of the panel.

2) One(1) inch incremental slots that permit attachment of components in an equally positive manner. Height adjustment of components is at 1" over the entire length of the panel. All panels are supplied with the proper hardware to connect panels together.

NON-ELECTRICAL defined as: RS come supplied with 2 die cast I-connectors. In the normal fashion the l-connector connects panels or panel and corner connectors on the top of the panel, and is used at the bottom of the panel. Non-electrical panels come with a 4" high extruded base molding at the bottom of the panel. Connecting hardware packed separately.

ELECTRICAL panels defined as: RR and RM come supplied with 2 die cast I-connectors . The l-connector connects the panel at the top and bottom. Connecting hardware packed in installation kit.

Included with all panels:

2008 Dansanna International